CH/CL Series
Built for the serious contractor, Crown CH/CL Series amplifiers deliver
the features, flexibility and power required in high-profile commercial
applications.
CH1, CH2, CH4 Amplifiers
CH amps offer both low and high impedance
outputs per channel, with each channel inde-
pendently capable of providing 4/8-ohm, 70V
or 100V operation. A 70-Hz high pass filter on
each channel provides low frequency rolloff
to eliminate step-down transformer saturation
when used in 70V and 100V distributed sys-
tems.
CL1, CL2, CL4 Amplifiers
CL amps offer low-impedance compatibility for
applications where high-power, low-impedance loads
are the primary requirement. The CL Series models
provide 2-, 4-, and 8-ohm options per channel. Rear-panel level con-
trols for secure operation and precision detented level controls allow
for accurate level settings in many fixed installation applications.
Active crossover with signal routing available with optional System
Solution Topology modules (SST-SBSC and ScreenArray SSTs).
Features
• Rear panel detented level controls allow for accurate level settings and
secure operation.
• “Contractor Correct” barrier strip output connectors allow for quick
and easy connection, regardless of the load.
• Accurate, uncolored sound with very low distortion for the best in
music and voice reproduction.
AMPLIFIERS
Model Inputs Outputs Power Output*
2-ohm Dual 4-ohm Dual 8-ohm Dual 70/100V Dual 4-ohm 8-ohm 140V 200V
(per channel) (per channel) (per channel) (per channel) Bridge Bridge Bridge Bridge
CH1 2 2 --- 450W 275W 300W --- 900W 600W 600W
CH2 2 2 --- 660W 400W 600W --- 1,320W 1,200W 1,200W
CH4 2 2 1,400W 1,200W 600W 1,200W --- 2,400W 2,400W ---
CL1 2 2 560W 450W 275W --- 1,100W 900W --- ---
CL2 2 2 900W 750W 450W --- 1,950W 1,320W --- ---
CL4 2 2 1,400W** 1,200W 600W --- 2,800W** 2,400W --- ---
*Maximum average power in watts at 1 kHz with 0.05% THD. **+200V line voltage provides 1,800W (2 ohm stereo) and 3,600W (4 ohm bridge-mono).
Commentaires sur ces manuels