Crown CE-4000 Instructions d'exploitation télécharger pdf (Page 14)

Page 14

CE-Series

Amps with an Attitude!

2 Detailed Install

Follow these instructions for a detailed explanation of

CE-Se-

ries

installation procedures and options. If you just want to get

up and running as quickly as possible, see the Quick Start

section on page 6.

2.1—Begin with the amplifier turned off and disconnected

from the power receptacle. The

CE-Series

power switch

is located on the left side of the front panel; it is OFF when

depressed on the left. Equipment that will be connected

to the inputs of the amplifier (such as mixers,equalizers or

signal processors) should also be turned off.

2.2—Mount the amplifier. Your

CE-Series

amp can be

mounted in a standard, 19-inch (48.3-cm) equipment

rack, or it can be simply stacked with other equipment.

And since your

CE-Series

amp is not as deep as many

amplifiers (only 12.25 inches (31.11 cm) behind the front

panel), you can also mount it in the shallow, wall-mount

racks.

Fig. 2.1

Mounting

Dimensions

If you choose to mount your amp in a rack, you should

secure the back of the rack as well as the front. Securing

the amp at both front and rear will assure that the amp

stays in place, even when the rack is transported or acci-

dentally dropped (which we know never happens).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

Pas de commentaire

Crown CE-4000 Instructions d'exploitation Page 14